Original Sharp Edge Tester: SET-50™ AND TC-3™ - UL 1439 Compliance

Description: Item: This is the original, high-quality tool developed to satisfy UL Standard 1439 for the “determination of sharp edges”. Most of our customers purchase the SET-50™ Sharp Edge Tester and TC-3™ Tape Cap Kit together. With this bundle you can save on both the cost of the items and on shipping and handling!The SET-50™ and TC-3™ are widely recognized for excellence in sharp edge safety compliance testing.Designed and engineered for rugged environments, our durable tool is lightweight and simple to use. This is the ideal solution to help you meet your UL Standard 1439 objectives.Counterfeits and Knockoffs: Please be aware of listings that offer cheap, imitation sharp edge testing tools. They are designed to look like the SET-50™ but are made abroad with inferior materials. Some of these counterfeit tools will even use our company model number and contact info to make them appear legitimate. However, there is no guarantee these counterfeit tools help achieve UL 1439 safety standards. Description: Proudly Made in the USA, the SET-50™ and TC-3™ are the original, solution to satisfy UL Standard 1439 for the “determination of sharp edges”. For more than 50 years this combination has been the leader in product safety testing equipment for edge sharpness.By ordering the TC-3™ Tape Cap Kit with the SET-50™ Sharp Edge Tester, you will ensure ample supply of tape caps for testing and will also save on additional shipping and handling from a separate order.SET-50™The SET-50™ is lightweight and features a clam shell housing that fits into the palm of your hand. It is constructed using a compact arm, sealed ball bearings to reduce friction, and a spring specifically designed to meet the latest Underwriters Laboratories’ force requirements. This housing ensures all moving mechanisms are protected against dirt and breakage.Used according to directions, the tester provides proper pressure that, when run along an item’s edge or surface, will help establish the object’s safety for handing and use.In order to perform a test, the SET-50™ must be used along with the TC-3™ tape caps. The combination of calibrated pressure applied by the SET-50™ and exact sensitivity of the TC-3™ tape caps fit onto the pressure head of the tool will result in a simple pass/fail that indicates if your product is safe.The SET-50™ comes with one (1) TC-3™ tape cap located on the pressure head of the tester. Tape caps are reusable until the test fails or any of the layers have been penetrated. At that point they must be discarded. It is important to have multiple tape caps on hand, especially during assembly line testing.In addition to the single tape cap, each tester includes a User Guide and Certificate of Calibration.TC-3™TC-3™ tape caps are specifically made for the Sharp Edge Tester SET-50™. Unlike other manufacturers, our tape caps fit precisely to ensure reliable and accurate test results. Each TC-3™ box contains 44 custom crafted tape caps.Tape caps are designed to test for sharp edges by simulating layers of skin on a finger. To conform with UL Standard 1439, every TC-3™ contains the following three (3) preassembled tape layers and a center guideline on a plastic cap:1 layer of Foam Black Tape1 layer of Foam White Tape1 layer of Teflon® TapeEach piece also feature a guideline on the center of the cap to help inspectors align the tool on the edge or surface being tested. TC-3™ tape caps slip on the pressure head of the Sharp Edge Tester SET-50™ for quick and easy testing.Each time a test is performed, a cut tape cap can be quickly identified, removed, and replaced within seconds, thus enabling more tests in less time. Tape caps are reusable until the test fails or any of the layers have been penetrated. At that point they must be discarded. It is important to have multiple tape caps on hand, especially during assembly line testing.

Price: 425 USD

Location: Mesa, Arizona

End Time: 2025-01-21T21:05:49.000Z

Shipping Cost: N/A USD