HELIX P SIX DSP ULTIMATE 6x140w 12-Ch DSP + DIRECTOR Remote + DMP

Description: HELIX COMBO HELIX P SIX DSP ULTIMATE 285w RMS per ch + 12-Channel DSPHELIX DIRECTOR Touchscreen Remote ControlHELIX DMP Director Mounting PanelHELIX P SIX DSP ULTIMATEFeatures Up to 285 W RMS output power per channel into 2 ΩUltra HD Class D concept – combines the high-end sound quality of Class AB technology with the benefits of Class D amplifiersTwinDSP Power – two extremely powerful “fixed point” Audio DSPs with 64 Bit resolution and 2.4 billion MAC operations per secondA/D and D/A signal converters from BurrBrownVCP (Virtual Channel Processing) allows even more flexible configuration for highly complex sound systemsACO – Advanced CoProcessor for extended feature setISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signalsProprietary TuneEQ function for automated adjustment of the output equalizersSFX (DSP Sound Effects) – Augmented Bass Processing, RealCenter & Co.High power 6-channel highlevel input with up to 32 V RMS input sensitivity and ADEP.3 circuitOptical (max. 96 kHz) and coaxial (max. 192 kHz) digital input in SPDIF formatFour RCA / Cinch outputs with max. 3 Volts output voltageOptical digital output in SPDIF format (96 kHz)Compact, future-proof Smart Control Port (SCP) for connecting remote controls and accessoriesHEC slot for system expansions like Bluetooth® HD Audio Streaming, High Resolution Audio Streaming via USB etc.Automatic Remote switchStart-Stop capability down to 6V supply voltageVery compact design with low heat dissipation thanks to extraordinary efficiencyTechnical data Power RMS ≤ 1% THD+N - @ 4 OhmsChannel A - F: 6 x 120 Watts - @ 2 OhmsChannel C - F: 4 x 230 Watts - @ 1 Ohm- - bridged @ 4 Ohms- - bridged @ 2 Ohms- Max. output power per channel*Channel A - F: up to 145 Watts RMS @ 4 OhmsChannel C - F: up to 285 Watts RMS @ 2 OhmsAmplifier technologyUltra HD Class DInputs6 x RCA / Cinch6 x Highlevel speaker input1 x Optical SPDIF (12 - 96 kHz)1 x Coax SPDIF (12 - 192 kHz)1 x Remote InInput sensitivityRCA / Cinch 1 - 4 Volts or 4 - 8 VoltsHighlevel 4 - 16 Volts or 8 - 32 VoltsInput impedance RCA / Cinch13 kOhmsInput impedance highlevel9 - 33 Ohms with ADEP.3Outputs6 x Speaker output4 x RCA / Cinch1 x Optical SPDIF (96 kHz)2 x Remote OutOutput voltage RCA / Cinch3 VoltsFrequency response10 Hz - 44,000 HzDSP resolution64 BitDSP power2 x 295 MHz (2.4 billion MAC operations/second)Sampling rate96 kHzDSP type2 x Audio signal processorSignal convertersA/D: BurrBrownD/A: BurrBrownSignal-to-noise ratio digital input108 dB (A-weighted)Signal-to-noise ration analog input102 dB (A-weighted)Distortion (THD)< 0,004 %Damping factor> 100Operating voltage10.5 - 32 Volts (max. 5 sec.down to 6 Volts)Power ratingDC 12 / 24 V ⎓ 65 A max.Idle current1350 mAMax. remote output current500 mAOperating temperature range-40° C to +70° CFuse3 x 20 A LP-Mini-fuse (APS)Additional features32 Bit CoProcessor, HEC slot, ADEP circuit, Auto Remote switch, Smart Control PortDimensions (H x W x D)50 x 260 x 190 mm /1.97 x 10.24 x 7.48“* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)DIRECTOR - Display Remote Control Everything under control! With the new remote control DIRECTOR, you lead from the front! The 2.8” / 7 cm full colour touchscreen display and the intuitive menu navigation allow easy handling of many features – for example: Source selection Volume control of all sources Volume control of the subwoofer Control and configuration of the HEC BT module Switching between sound setups Furthermore it provides sufficient memory for 20 additional sound setups and comes with a USB connector allowing straight access to your DSP device via the DIRECTOR - a big relief if you want to tweak your configuration while your processor/amplifier is hidden somewhere in the trunk. The high-resolution, full colour touchscreen display is housed in what was solid block of aluminum. The DIRECTOR is compatible with all DSP products which are supported by DSP PC-Tool Version 3 and higher. Features § 2.8“ / 7 cm touchscreen display and powerful ARM processor § Easy handling of the main functions § Volume control of all sources § Volume control of the subwoofer § Source selection § Control of the HEC BT module (Bluetooth® Connect functions: pairing, reconnect, disconnect / Bluetooth® Control functions: track forward/back, play/pause) § Switching between sound setups § Memory locations for 20 additional sound setups (only devices without ACO platform) § Automatic dimming function of the display § Display rotation adjustable to 180° § Compatible with all DSP products which are supported by DSP PC-Tool Version 3 and higher § Exclusive solid aluminum housing § 17’ / 5.2 m connection cable included Technical data Dimensions (H x W x D) 53.50 x 135 x 18 mm; 2.07 x 5.32 x 0.71" DMP DIRECTOR mounting panel is made from an ABS plastic with a refined, black soft touch finish. This ensures a safe, flush finish that allows the Director to blend into your cars interior. Features § Material: ABS with black soft touch finish § Mounting screws for fixing the DIRECTOR to the mounting panel are included in delivery

Price: 2299 USD

Location: Yakima, Washington

End Time: 2024-09-25T04:00:41.000Z

Shipping Cost: 0 USD