BR200 Generator Interlock Kit Eaton / Cutler Hammer or Challenger 150 & 200A BR

Description: Proudly made in the USA! Generator Parts manufactures a high quality line of generator breaker interlock kits. These interlocks are made of 6061T-6 aluminum and are sand blasted and then anodized. They look professional and they make the installer look professional. There are no sharp edges or plastic components on the assembly like you find on similar kits. The BR-200 Interlock Kit fits Cutler Hammer (Eaton) BR Series, BR Series with plug-on neutral, and CH Series with plug-on neutral, both 150 and 200 amp panels that have a horizontal throw single main breaker and 1 1/4 " to 1 1/2" spacing between the closest edge of the main breaker cut-out and the closest edge of the generator breaker panel cut-out. Please see the attached photos. The main breaker can be located at the top or bottom of the panel. The area surrounding the main breaker on the panel cover MUST be RAISED or FLAT, as shown in the photos. If you have a DEPRESSED area surrounding the main breaker, you need an NCH-200 Interlock Kit instead. This interlock kit meets the requirements of Article 702 of the National Electric Code ANSI/NFPA 70. NEVER back feed a breaker panel without a generator breaker interlock kit. Doing so could easily energize utility lines with very high voltages that could easily be lethal to a lineman or other utility worker. Be safe and do the right thing. These quality kits are money well spent. The kits include: Anodized aluminum generator breaker interlock assembly Clear and simple installation instructions A high quality 3/16" drill bit Name brand thread lock compound Generator breaker retaining strap Vinyl weatherproof complete label set Once you purchase an interlock kit from Generator Parts you won't ever want to purchase any other brand.

Price: 48.77 USD

Location: Iron River, Michigan

End Time: 2024-08-20T16:58:34.000Z

Shipping Cost: 0 USD