All-in-One Egg Incubator 40 Egg Hatching with LED Candler, Automatic Turning

Description: FAQ for Magicfly All-in-one 40 Eggs Incubator:Q:Is this a forced-air or still-air incubator?A: It’s a forced air incubator. It has a little fan in it that circulates the air.FAQ for the Auto turner:Q: How do I know if its turning my eggs?A: You can test by marking the egg with a pencil and periodically checking to see if the marked side has moved. It's a slow process.Q: Is it possible to turn off the automatic turner?A: Yes, when you adjust the turn time to “0”, the automatic turner will be turned off.FAQ for the humidity:Q: Does it show the humidity reading? And how to keep the humidity?A: Yes, it is built-in a humidity and there is a LED screen for watching the humidity. You should manually adjust the humidity and add or remove water as needed. It stays pretty consistent. You could give it a passing look each day to check the temp and put in water if needed to keep the humidity around 55%. That will vary by location and weather.FAQ for the temperature.Q: The incubator is not holding a consistent temp. How to do that?A: 1. The factory temperature setting is about 38C/100.4F(this degree issuggested for the chicken eggs, if any other kinds of eggs, you need to adjust by the suggested temp.)2. For the "inaccurate" reading of the temp, After some time, the sensors of other thermometer might start to give false reading by a degree or two which can affect hatch rates if not caught. This isn't exclusively a Magicfly issue, it also happened to other incubator and other thermometer.We suggest you could use more than one thermometer/humidity sensors to work with if needed.3. Recommended setting note: The temperature of house-used thermometer may vary from our egg incubator, when the ambient temperature is less than 25℃(77℉)， it is better to take measures for heat preservation. It’s good for temperature uniformity when the device is enclosed with clothes or other warms, and it also helps energy-saving and reduces heat dissipation.IMPORTANT NOTES:1.The initial setup of this egg incubator is factory settings. The temperature is pre-set 100.04℉ and hatch days is 21 days for chicken eggs. If you are going to hatch chicken eggs, then you don't need to adjust anything. Just press "MENU" once and the incubator will start to work. (For the first time after plugging the incubator into power, it takes 1 HOUR for the incubator to reach the proper temperature. During this time, there will be no alarm sound. Please be patient and wait.)2.For other types of eggs, please adjust the settings IN ORDER according to our user manual.Long press "MENU" for 4 seconds to enter the setting mode. When you see the LED screen flash, you can start to set REMAINING HATCH DAYS first, then TEMPERATURE and at last HUMIDITY. For each settings, you need to long press "MENU" for 4 seconds to enter the setting mode. But if you only need to set one thing, just press "MENU" once and the incubator will start to work.3.As for HUMIDITY setting, you can customize the HUMIDITY RANGE of the first incubation period and the second incubation period (move to hatching tray day)."1L" means the minimum humidity% for the first incubation period. "1H" means the maximum humidity% for the first incubation period. "2L" means the minimum humidity% for the second incubation period. "2H" means the maximum humidity% for the second incubation period.4.Pay attention to the room temperature to ensure that it remains stable between 74℉-80℉（23℃-26℃）, and it doesn't drop below 72℉ at night. If the room temperature is higher than 86℉/30℃, it may cause the heating wire not working properly and hard to cool down.5.Press "+" and "-" at the same time for 4 seconds to RETURN to factory settings for incubate chicken eggs. (It also takes 1 HOUR for the incubator to reach the proper temperature.)Large Capacity: Magicfly Egg Incubator can hold up to 40 eggs of normal size, which offers more space and higher efficiency for hatching than other smaller incubators.Wide Applications: Our incubator can hatch a variety of fertilized eggs including chickens, ducks, quail, pheasant eggs, etc. (Kindly note that different eggs require different hatching days, temperature and humidity.)This egg incubator automatically rotates the eggs every 2 hours so that each egg are heated evenly.You can also customize the egg turning time by pressing buttons. Set "0" to not turn eggs.NOTE: The pin must insert the shifting slot of the movable egg tray, so that the egg tray can shift normallyWithout opening the incubator lid, you can control the humidity level by refilling water through the external water top-up. This will reduce temperature and humidity fluctuation.Please add water according to the humidity displayed on the LED screen. Recommended to add water every two days.NOTE: When the humidity% is higher than set range, you can open up the water filling hole to volatile water vapor.The alarm will sound and the LED screen will flash to remind you when the temperature is 2℃ higher or lower and the humidity is higher or lower than your settings.This will reduce the loss of your mistakes during the incubation process.(Kindly note that you can turn off the alarm sound by pressing "MENU", but the LED screen will continue to flash until the temperature and humidity level return to normal settings.)Magicfly Egg Incubator can hold up to 40 eggs of normal size, offering more space and higher efficiency for hatchingThis simple and reliable egg incubator is fun for families that want to start incubating chickens, ducks and geese. The easy design and functions allow kids to learn the basics of incubating eggs.Material: PP+ABSVoltage: 110V/50HZ for USA, Canada (with USA plugs)Operating voltage: 100-110V/60HzIncubation Environment: IndoorAmbient temperature: 74℉-80℉Cleaning Method: Use a dry cloth or brush to clean (Unplug the power cord before cleaning)Product Dimension: 17.5"x13"x6.5"Package included: 1 x Egg Incubator, 1 x User Manual, 1 x Power Cable with US plugOn Jul 10, 2024 at 21:55:50 PDT, seller added the following information:

Price: 42.99 USD

Location: Azusa, California

End Time: 2024-08-11T03:02:47.000Z

Shipping Cost: 0 USD