Description: INCLUDES: 1x D3220Ti 2″ High frequency Driver 300 Watts 8 Ohm – Titanium Diaphragm with 1x WGP14-50X Red CR 2" Exit Horn FeaturesD3220Ti Innovative technology for 3 inch compression drivers, the new high-strength compact motor, allows you to keep a large voice coil without sacrificing performance. With a smaller design and as powerful as ever, this high frequency 2″ exit driver is taking the industry to the next level!The new D3220Ti design still retains the same diaphragm design as the previous model. This offers the famous PRV Audio crisp high output on high frequency response, with accuracy (from 1200 to 17,000 Hz) with an emphasis on the critical upper frequency range.Pure Titanium diaphragm with large 3″ Voice Coil, providing the lowest possible moving mass with excellent efficiency – 108 dB Sensitivity.Works great with any Shallow Horn fromWGP14-50X Series – Perfect as compression driver for car audio. Mounting hardware is included.2 Inch Exit horn Driver with crystal clear, high impact highs response from 1200 to 17,000 HzPRO Audio high frequency driver, able to handle 300 Watts Continuous Program Power (RMS) with music for extreme output capability.The D3220Ti ferrite titanium compression horn driver, offers the best performance for the price, features a compact magnet motor.This allows you to use this horn driver in custom doors and stuntwall systems for vocal reinforcement. We have created a compact and powerful driver that solves the critical component spacing and weight issue in large systems.The special diameter allows front mounting, making it easy to install, without detaching the driver from any WGP14-50 Horn. The driver diameter measures only 5.71″ having enough clearance to fit inside the 5.75″ baffle cut needed for our 2″ exit horns from the WGP14-50 Series.Make your system unique with our colored horns. Available on Single Color, Dual Color, and Dual Tone Finish. The titanium diaphragm is attached to a 3″ diameter copper-clad aluminum wire with Kapton® former for a high 300 Watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP. 1400 Hz at 12 dB per octave filter Crossover / BT121200 Hz at 18 dB per octave filter Crossover / BT18The pure titanium diaphragm of this driver provides crisp output focusing on vocals and high-frequency response, making it our most famous high-frequency driver! GENERAL SPECIFICATIONSExit Throat Diameter2” (50 mm)Nominal impedance8 OhmNominal Power Handling*150 WattsContinuous Program Power(RMS)**300 WattsMax Peak Power***600 WattsSensitivity 2.83V at 1m108 dBRecommended Hi Pass CrossoverFor Full Power Handling1400 Hz12db/oct CrossoverFrequency Response at -10dB1,200 – 17,000 HzVoice Coil Diameter3” (76 mm)Voice Coil WireCCAWVoice Coil Former MaterialKaptonDiaphragm MaterialTitaniumFlux Density1.77 TMagnet MaterialFerrite WGP14-50X Red CR After several months of research and development in search of a shorter horn that would still amplify low frequencies without any output loss, PRV Audio Group engineers developed the WGP14-50X Horn Series’ patented design (Patent #29/842,663), which features a unique octagonal shape engineered not only for outstanding looks, but to dramatically increase dispersion and output on a compact profile!Take your custom system to the next level armed with a unique LOOK with the WGP14-50X Horn Series, a waveguide with a 2″ throat exit designed to work with any of our 2" Exit Compression Drivers. We reduced 1.16″ off its mounting depth, compared to our rounded WGP14-50 Horn Series, giving the new design only 3.86″ of mounting depth. This increases options for custom systems, allowing you to fit more with less space, which is ideal for both custom door panels and trunk systems.Its chrome paint gives it a distinct finish, making this new series the most unique horn in today’s car audio market!Compact Profile allows to mount 2″ drivers with very little depthSquared outside edges allow easy side or up stack of multiple drivers in a compact format2″ throat with standard 4-bolt mounting patternNon-resonant reinforced plastic constructionWide Coverage with a Limit frequency of 700 Hz GENERAL SPECIFICATIONSThroat Diameter2” (50.8 mm)Mounting TypeBolt-onHole Dimensions0.31″ 8 mmBolt Circle4″ 102 mmNominal Coverage Horizontal60°Vertical60°Flare typeHybridMaterialPlastic (ABS)Finish / CoatingSeveral ColorsDimensions Height6.16″ (156.5 mm)Width6.16″ (156.5 mm)Depth4.37″ (111 mm)Mounting Depth3.86″ (98 mm)Baffle Cutout Diameter Circle5.75″ (146 mm)Net weight0.46 lb (0.21 kg)
Price: 109.82 USD
Location: Pompano Beach, Florida
End Time: 2024-03-04T20:30:09.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Compatible Brand: Universal
Frequency Response at -10dB: 1,200 – 17,000 Hz
Voice Coil Wire: CCAW
Bundle Description: One D3220Ti Driver + One WGP14-50X Red CR
Size: 2"
Exit Throat Diameter: 2” (50 mm)
Nominal impedance: 8 Ohm
Diaphragm Material: Titanium
Compatible Model: D3220Ti
Voice Coil Diameter: 3” (76 mm)
MPN: D3220Ti
Max Peak Power: 600 Watts
California Prop 65 Warning: California proposition 65 requires businesses to provide warnings to Californians about significant exposure to chemicals that cause cancer, birth defects, or other reproductive harm.
Flux Density: 1.77 T
Magnet Material: Ferrite
Brand: PRV Audio
Type: Horn/Compression Driver
Program Power (RMS): 300 Watts
Country/Region of Manufacture: Unknown
Voice Coil Former Material: Kapton
